One stop granulator service provider, industry leader, A comprehensive solution
Product Description
Product Parameters
| Model | Power(kw) | Capacity(kg/h) | Final size | Oversize | Weight |
| 450 | 55+1.5+0.37+0.55KW | 0.7-1.2t/h | 2-12mm | 2200*900*1600 | 3t |
| 550 | 75+1.5+0.37+0.55KW | 0.8-1.3t/h | 2-12mm | 2600*1300*2300 | |
| 560 | 90+1.5+0.37+0.55KW | 1-1.5t/h | 2-12mm | 2600*1300*2300 | 6.3t |
| 680 | 132+1.5+0.37+0.55KW | 2-2.5t/h | 2-12mm | 3200*1400*2400 | 8.5t |
| 850 | 220+2.2+0.37+0.55KW | 2-3t/h | 2-12mm | ||
| 850A | 220+2.2+0.37+0.55KW | 2.5-3.5t/h | 2-12mm | ||
| 880 | 315+3+0.37+0.55KW | 3-4t/h | 2-12mm |
Application
1, Use Wood Chipper, Wood Crusher to make wood logs, chips (or other materials) smaller.
2, Use Dryer (rotary drum dryer / Air-flow dryer) or add water to the sawdust(or other materials) till its moisture content between 8-15%, which is the best moisture content for pelletizing.
3, Put the sawdust into the pellet machine gradually. Large scale pellet production need a screw feeder to make sure stable feeding of raw material.
4, After pelletized, the pellets are of high temperature that is not suitable for direct packing. So they should be cooled by pellet cooler. Then, pellets go through a vibrating sieve, where good pellets will be left, while broken ones or powder will be collected for reproduction.
5, After all the above procedures, pellets can be packed with a pellet packing machine.
Uses of biomass pellets:
1, Domestic heating and living energy: high fuel efficiency and easy storage;
2, Biomass industrial boiler: as the main fuel of industrial boilers, it can replace coal and solve environmental pollution;
3, Power generation: can be used as a fuel for thermal power generation crop straw, various skins, etc., twigs, branches, bark, leaves, wood scraps, rice husks, peanut husks, melon seed husks, bamboo shavings, bagasse, palm husks.
Advantage
1, Wood pellet machine can produce a variety of wood chips, straw, husk and other raw materials based biomass particles;
2, The use of cold pressing molding, extrusion molding and other molding technology, grease polishing polishing process makes biomass particles beautiful appearance, more compact structure;
3, Wood pellet machine high output, low energy consumption, low noise, low failure, machine fatigue resistance, continuous production, economic and durable;
4, The whole machine is made of special high-quality materials and advanced shaft transmission device, and the key components are made of high-quality alloy steel and wear-resistant materials;
5, The wood pellet machine mold is placed flat, the mouth is upward, and it is directly into the granulation mold from top to bottom;
6, The proportion of wood chips is very light, straight up and down, the sawdust into the press wheel rotation to the four sides, uniform compression particles;
7, Wood pellet machine is upward open, easy to heat, in addition to a set of air-cooled cloth bag dust, automatic refueling;
8, Wood pellet machine is a hard enlarged shaft, large cast steel bearing seat, its large bearing does not bear any pressure, not easy to break, long life.
Raw Material
Biomass fuel is the use of crops of corn stalk, wheatgrass, straw, peanut shell, corn cob, cotton stalk, soybean stalk, rice husk, weeds, branches, leaves, sawdust, bark and other solid waste as raw materials, after crushing, pressurizing, densification, molding, into a small rod-like solid particle fuel.
1, Raw materials diameter requirement: 3-5mm(If large ,crusher machine should be used)
2, Raw materials moisture: 15-25%.(If beyond the scope,dryer machine should be used )
